Tulsa Cabinet Glaze and Paint Job

Project Overview


We repainted this set of kitchen cabinets in Claremore.  The client wanted to change the color of the cabinets, give them a clean and durable finish, and glaze/faux finish the island to match another piece they had in the dining room.

We painted all the cabinets a slight off white color (Sherwin Williams Moderate white) to match the backsplash tile and floor tiles.

We painted the cabinets with an oil based enamel paint that gets very hard and is very durable.  It is a one part system.  In this instance, the doors are sprayed, and cabinet boxes were brushed by hand.

More Info


We start off all kitchen cabinet projects by creating a dust/fume barier around the work area.  In this case, we erected a wall of plastic using sheet plastic and poles designed for the task.

Next we remove all the hardware and safety store it until we are ready to re-install everything.

The doors, drawers and shelves are taken to the shop to get prepped and sprayed.

Most Recent Entries

Owasso Cabinet Paint

Project Overview


This interior paint project was located in Owasso OK.  We were asked to prepare and repaint the kitchen cabinets, along with the vanities and cabinets in two bathrooms.

We also painted the trim and doors in the kitchen to match.  The cabinets were clear coated oak before we began.  We used Sherwin Williams Pro Classic Oil on this owasso painter project.

Cabinet Painting can be an expensive and time consuming process as there is a lot of prep and skill involved in painting them.  Dukes Painting has extensive experience and knowledge when it comes to cabinet finishes and interior painting.

More Info


Since the kitchen cabinets were stain grade to begin with, there was a lot of prep work in this paint project.  We began by removing all of the doors and transporting them back to our shop for preparation and paint.  We prep this type of cabinet by sanding everything we are going to paint with 150 grit and then 220 grit sand paper.  Then we remove all the dust with tack cloths and vacuum cleaners.

Next we prime all of the wooden cabinets with a high quality oil based primer.  Since these were oak cabinets, the grain of the oak posed a small problem.  Primer must be worked into all of the little groves created by the oak grain.  Next we caulked all of the cracks and filled any nicks with wood filler.  After a final sanding with 220 grit sandpaper the cabinets are ready to paint.  On the doors we applied 2 coats of Sherwin Williams Pro Classic Oil based paint.  We choose this paint for ist wonderful self leveling properties.  This paint can be brushed on and the brush lines will dissapear before the paint dries creating a sprayed on finish.

The doors were sprayed two coats and the cabinet boxes were brushed and rolled three coats using an oil based brush and foam rollers.  After finishing all the paint work we returned the cabinets to the property for re-installation.  In this particular paint project, we replaced the old hinges with new modern hinges.  We also drilled holes to install drawer and door pulls where there weren’t any to begin with.

Most Recent Entries

Tulsa Midtown Bungalow Garage Door Paint

Midtown Bungalow Interior and Exterior

Project Overview


This painting project included a lot of different smaller paint jobs.  The bigest portion of the work was painting the trim and walls in the office.  The office was previously painted with a faux finish and it took several coats to cover properly.  This job also included repairing water damage in the dining room (the window had leaked and the paint was pealing off the trim and wall), staining and clear coating an interior door, painting 3 exterior doors, repaint the entire exterior of the garage including a new man door and garage door. I also touched up and repainted various imperfections throughout the house including chips and marks and water damage.

More Info


This painting project called for nearly 8 different colors and as many products.  Sherwin Williams products were used throughout.  Superpaint Satin for the exterior doors and garage. Promar 200 for the walls, trim, and ,ceilings.

Most Recent Entries